1989 BMW 3 Series Coupe
$11,300 SOLD
🔔 Alert me about 3 Series Convertibles
47 photos of this car.
Details
| Year | 1989 |
|---|---|
| Model | 3 Series Coupe |
| Series | E30 |
| Chassis | WBAAA1305K8254369 |
| VIN | WBAAA1305K8254369 |
| Mileage | 204,500 miles |
| Colour (as listed by seller) | Henna Red |
| Interior colour | Black |
| Transmission | 5-Speed |
| Condition | THIS... is a 1989 BMW 325i Coupe, finished in Henna Red with a black interior. - The attached Carfax history report starts in 1993 and lists no accidents since. - This 325i's factory-fitted 2.5-liter straight-6 engine has been replaced with a 3.2-liter "S52" straight-6 reportedly sourced from a 1998 M3. The list of modifications reported by the seller also includes a Mishimoto radiator, an OBD2 conversion, a ZF 5-speed manual transmission, a limited-slip differential with a 2.93 ratio, 17-inch BBS wheels, Solo Werks coilovers, rear trailing arms and hubs from a Z3, front brakes from an E36 M3, a quick-ratio steering rack from a Z3, and "Vader" front seats from an E36 M3. More details about the modifications performed on this 3 Series are provided below. - BMW introduced the E30-generation 3 Series in the United States late in the 1983 model year. It was originally offered exclusively with a 4-cylinder engine, but 6-cylinder-powered models were quickly added to the range. The 325e notably joined the line-up for 1984 as the first 6-cylinder-powered E30 sold in the United States, and the 325iX released for 1988 was the first series-produced BMW with permanent all-wheel-drive. BMW made several updates to the E30 and production ended after the 1991 model year. - Power comes from a 3.2-liter straight-6, rated at approximately 240 horsepower and 236 lb-ft of torque. It spins the rear |
| Seller | Auction seller |
| Listed by | Cars & Bids |
| Location | Bangor, ME |
About this car
Sold on Cars & Bids on October 27, 2022 for $11,300. The car is in Bangor, ME. The full gallery and listing details come from the car's own auction page.
More about this car
THIS... is a 1989 BMW 325i Coupe, finished in Henna Red with a black interior. - The attached Carfax history report starts in 1993 and lists no accidents since. - This 325i's factory-fitted 2.5-liter straight-6 engine has been replaced with a 3.2-liter "S52" straight-6 reportedly sourced from a 1998 M3. The list of modifications reported by the seller also includes a Mishimoto radiator, an OBD2 conversion, a ZF 5-speed manual transmission, a limited-slip differential with a 2.93 ratio, 17-inch BBS wheels, Solo Werks coilovers, rear trailing arms and hubs from a Z3, front brakes from an E36 M3, a quick-ratio steering rack from a Z3, and "Vader" front seats from an E36 M3. More details about the modifications performed on this 3 Series are provided below. - BMW introduced the E30-generation 3 Series in the United States late in the 1983 model year. It was originally offered exclusively with a 4-cylinder engine, but 6-cylinder-powered models were quickly added to the range. The 325e notably joined the line-up for 1984 as the first 6-cylinder-powered E30 sold in the United States, and the 325iX released for 1988 was the first series-produced BMW with permanent all-wheel-drive. BMW made several updates to the E30 and production ended after the 1991 model year. - Power comes from a 3.2-liter straight-6, rated at approximately 240 horsepower and 236 lb-ft of torque. It spins the rear wheels via a 5-speed manual transmission.





























































