1962 Ferrari Replica
$150,000 SOLD
50 photos of this car.
Details
| Year | 1962 |
|---|---|
| Model | Replica |
| Series | 250 |
| Chassis | HLS30-20098 |
| VIN | HLS30-20098 |
| Mileage | No Odometer - TMU |
| Colour (as listed by seller) | Silver |
| Interior colour | Black |
| Transmission | 5-Speed |
| Condition | THIS… is a 1962 Ferrari 250 GTO tribute, finished in silver with a black interior. - This car is a replica of a 1962 Ferrari 250 GTO. Street-legal and titled in Washington state as "1971 Datsun 240Z," the seller reports that he custom-built this car over the course of eight years using a Datsun 240Z central body section and VIN, a full custom frame based on Ferrari reference photos, and a hand-laid composite body. Although this 250 GTO replica is not equipped with an odometer, the seller reports that the chassis has fewer than 4,000 miles, and the engine has fewer than 1,000 miles. - A partial list of additional notable equipment reported by the seller includes a custom-fabricated interior, 15-inch Dayton knock-off wheels, Wilwood disc brakes, and QA1 coilovers. Additional details of the build are listed below, and photos of the build process are pictured in the "Other" section of the gallery. - The Ferrari 250 GTO was produced from 1962 to 1964 as a homologation special for GT-class racing, with just 36 examples built. Powered by a 3.0-liter V12 and developed for competition use, it achieved success in events like the Tour de France, Targa Florio, and 24 Hours of Le Mans. Its combination of performance, rarity, and design has made it one of the most valuable collector cars in the world. - Power for this 250 GTO replica comes from a tuned 355-cubic-inch Chevrolet V8 engine. Out |
| Seller | Auction seller |
| Listed by | Cars & Bids |
| Location | Snohomish, WA |
About this car
Sold on Cars & Bids on January 21, 2026 for $150,000. The car is in Snohomish, WA. The full gallery and listing details come from the car's own auction page.
More about this car
THIS… is a 1962 Ferrari 250 GTO tribute, finished in silver with a black interior. - This car is a replica of a 1962 Ferrari 250 GTO. Street-legal and titled in Washington state as "1971 Datsun 240Z," the seller reports that he custom-built this car over the course of eight years using a Datsun 240Z central body section and VIN, a full custom frame based on Ferrari reference photos, and a hand-laid composite body. Although this 250 GTO replica is not equipped with an odometer, the seller reports that the chassis has fewer than 4,000 miles, and the engine has fewer than 1,000 miles. - A partial list of additional notable equipment reported by the seller includes a custom-fabricated interior, 15-inch Dayton knock-off wheels, Wilwood disc brakes, and QA1 coilovers. Additional details of the build are listed below, and photos of the build process are pictured in the "Other" section of the gallery. - The Ferrari 250 GTO was produced from 1962 to 1964 as a homologation special for GT-class racing, with just 36 examples built. Powered by a 3.0-liter V12 and developed for competition use, it achieved success in events like the Tour de France, Targa Florio, and 24 Hours of Le Mans. Its combination of performance, rarity, and design has made it one of the most valuable collector cars in the world. - Power for this 250 GTO replica comes from a tuned 355-cubic-inch Chevrolet V8 engine. Output is sent to the rear wheels via a 5-speed Tremec manual transmission.
What the pictures show
- As photographed, this car is a replica built in the style of a Ferrari 250 GTO, finished in metallic grey with a red nose and centre stripe and large white roundels carrying a racing number on the nose, doors and tail.
- Period-style details have been carefully shown: Perspex-covered headlamps, leather bonnet straps, a hinged fuel flap, chrome bullet mirrors, small round tail lamps and centre-exit twin megaphone exhaust tips.
- It has sat on polished wire wheels with knock-off hubs and Dunlop-branded tyres, and one shot on a lift has exposed the red front bodywork from below with the grille aperture empty.
- The cabin has been trimmed as a race car: black bucket seats with bright red multi-point harnesses, diamond-quilted black trim on the tunnel and rear bulkhead, plain black door panels and a wood-rimmed wheel ahead of a textured dash with a large central rev counter.
- Under the bonnet the photos have not shown a Ferrari V12; they have shown an American V8 with finned Edelbrock valve covers, an orange block and ancillaries, a scorpion-marked air cleaner and wrapped exhaust manifolds.
- Underside and build photos have shown a fabricated chassis, coil-over suspension, a finned differential cover, silver heat-insulation matting being fitted in the cabin and the bare front structure with radiator during construction.
- A small GTZ badge with a scorpion has been photographed on the bodywork, underlining the tribute nature of the build as presented.
Money: sold for $150,000 (recorded sale price).
























































