1967 Ford mustang fastback
$175,000
🔔 Alert me about Mustang Fastbacks
1 photos of this car.
Market check
Details
| Year | 1967 |
|---|---|
| Model | Ford mustang fastback |
| Series | Mustang Gen 1 |
| Mileage | 1,259 miles |
| Colour (as listed by seller) | Blue |
| Interior colour | black |
| Transmission | Automatic |
| Seller | Marketplace seller |
| Listed by | |
| Location | Mesa, AZ |
About this car
Listed on Facebook Marketplace in Mesa, AZ at $175,000. This 1967 Ford mustang fastback is offered by a Marketplace seller; the listing was verified live at harvest on 2026-10-27.
More about this car
1967 FORD MUSTANG FASTBACK — DEVILS DOZEN #1 OF 13 | CUSTOM HIGH-END RESTOMOD
SPARED NO EXPENSE. BUILT TO STAND APART. DARE TO BE DIFFERENT!
A truly distinctive 1967 Ford Mustang Fastback featuring an original Ford fastback VIN, an aggressive custom design, extensive one-off fabrication, and a powerful 331 Stroker V8. This is not an ordinary restoration or a Mustang assembled from a catalog of aftermarket parts. It is a ground-up, nut-and-bolt custom build created by Desert Classic Mustangs, internationally recognized for its specialty Mustang builds, including custom Shelby, Eleanor, Bullitt, and right-hand-drive Mustangs.
Introducing the Devils Dozen — Number 1 of a planned production of only 13 vehicles. This limited-production custom design combines classic Mustang styling with radical bodywork, handcrafted stainless-steel details, modern performance components, and an interior unlike anything you'll find in a factory-built Mustang.
Finished in a custom blue developed by Desert Classic Mustangs, this car was designed to command attention from every angle.
ENGINE, PERFORMANCE & CHASSIS
331 Stroker V8 engine with four-barrel carburetor
Built automatic transmission, painted to match the engine
Total Control Products (TCP) structural reinforcement and suspension components
TCP front suspension with adjustable upper control arms, coilovers, and strut rods
Heidts rear suspension with coilovers and Viking adjustable shocks
Built Ford 9-inch rear end with tie-down kit
Wilwood rear brakes and Wilwood master cylinder
Coated headers and custom exhaust system
Flowmaster 40 Series exhaust with H-pipe and breakaway kit
March Performance front-runner system
Oversized aluminum radiator with dual electric fans
Modern air-conditioning compressor and power steering
HI-TEK air cleaner with Devils Dozen graphics
Underhood LED lighting
Engine compartment painted to match the exterior
The chassis and suspension were built to complement the car's performance, with structural reinforcement, upgraded suspension geometry, and adjustable components throughout.
THE DEVILS DOZEN EXTERIOR
The body design incorporates numerous custom-fabricated components developed by Desert Classic Mustangs. Many of these features required extensive hands-on fabrication rather than simply installing off-the-shelf parts.
Signature features include:
Custom two-piece steel hood with a polycarbonate viewing window
Integrated hood heat extractors and custom cowl design
LED lighting beneath the hood to illuminate the engine at car shows
Custom split front bumper design
Hand-built side fender vents with heat extractors
Custom upper vents featuring handcrafted stainless-steel bubble inserts
Custom lower quarter-panel vents
Molded wheel-opening flares integrated into the lower rocker styling
Custom grille with powder-coated components
Custom aluminum rear taillight panel
Steel rear deck lid with a remotely operated, motorized rear wing
Custom center-exit rear exhaust
Ringbrothers door handles featuring a distinctive gemstone-style accent
Flip-down fuel cap featuring Devils Dozen branding
New glass throughout, with tinted rear glass and smoked remaining glass
Black exterior mirrors
Powder-coated exterior stainless trim
Custom Devils Dozen graphics and badging
The motorized rear wing sits flush with the deck lid when lowered and rises at the push of a button. The hood's viewing window allows the engine to be showcased without opening the hood.
The custom blue finish, split bumpers, center-exit exhaust, sculpted bodywork, and handcrafted trim give this Mustang a presence that is impossible to mistake for a stock 1967 Fastback.
CUSTOM INTERIOR — HANDCRAFTED DETAILS
The interior continues the Devils Dozen theme with custom stainless-steel work, exotic hardwood, illuminated controls, and performance-oriented seating.
Custom-built center console with integrated lighting
Handcrafted stainless-steel bubble-design dashboard panels
Matching custom door panels with stainless-steel bubble inserts
Exotic Bubinga hardwood rear deck, approximately 1/2-inch thick
More than 15 coats of clear finish on the Bubinga wood
Polished stainless-steel rear deck trim
Procar Rally 1000 Series seats
Crow Racing seat belts
Custom seat platforms repositioned for additional legroom
Center-mounted Lokar emergency parking brake
Automatic ratchet-style shifter
Venom Series gauges
Illuminated push-button start
Custom toggle-switch controls for grille fog lamps and underhood LEDs
Illuminated upper console
Black tilt steering column
Custom steering wheel
American Autowire electrical wiring system
Large-screen stereo system
Dual concealed 10-inch subwoofers beneath the rear deck
Interior sound insulation and ceramic coating
Roll bar
The Bubinga wood rear deck and matching stainless-steel accents are standout features, tying the interior together with a level of detail rarely seen in a custom Mustang.
EXTERIOR WHEELS & STANCE
Foose Knuckle F099 wheels in 17-inch and 18-inch sizes
Indy 500 performance tires
Custom Devils Dozen wheel graphics
Modified wheel openings and integrated flares
Adjustable front and rear suspension components
The overall stance was designed to complement the aggressive bodywork while maintaining the unmistakable profile of the original Mustang Fastback.
UNDERBODY & TRUNK
The build continues underneath the car, where the focus remains on protection, performance, and custom fabrication.
Underbody sealed with epoxy primer and finished with Duraliner protective coating
Reinforced structural components
Painted fuel tank with wraparound reinforcement
Oversized fuel tank positioned to accommodate the custom exhaust
Trunk-mounted battery
10-pound fire extinguisher
Custom-finished trunk area with usable storage space
A LIMITED-PRODUCTION CUSTOM BUILD
The Devils Dozen is a limited-production design by Desert Classic Mustangs, with only 13 vehicles planned. This example is designated Number 1 of 13.
Desert Classic Mustangs developed numerous distinctive components for this design, including the viewing-window hood, split bumpers, custom vents, stainless-steel bubble inserts, and motorized rear wing. Select components are also available from Desert Classic Mustangs for other custom builds.
This vehicle represents an extensive investment in custom fabrication, design, and assembly. It is intended for the buyer who wants something far beyond a conventional restored Mustang.
DOCUMENTATION
The new owner will receive the available build records, including approximately 350 photographs documenting the vehicle's construction.
THE BOTTOM LINE
Devils Dozen #1 of 13. Custom-built. Distinctive by design. Impossible to confuse with an ordinary Mustang.
From the 331 Stroker V8 and reinforced chassis to the illuminated hood, motorized rear wing, center-exit exhaust, exotic wood interior, and handcrafted stainless-steel details, this 1967 Fastback was built for the enthusiast who wants something truly different.
Serious inquiries are welcome. Please contact us for additional information, build documentation, and details.
Desert Classic Mustangs — Custom Mustangs Built to Stand Apart.
What the pictures show
- Only one photo exists for this Mustang fastback, and that single frame is its full gallery: a cropped side view of the deep blue 1967 fastback on asphalt in Mesa, AZ, cut off at both the nose and the tail.
- The blue paint the listing names matches the photo and looks deep and glossy, with silver rocker stripes, fender vents and large polished five-spoke wheels giving it a restomod stance.
- The fastback roofline and side glass look clean, and the visible flank looks straight, but the front and rear of the car are literally outside the frame.
- The listing shows just 1,259 miles, an extraordinary figure that reads as a build or reset figure rather than road use, and there is no instrument photo to check it against.
- No front, rear, interior or engine views exist, so the nose, cabin and powertrain cannot be judged from the gallery.
- The one cropped frame shows a striking blue fastback in show colours; at this money, the missing documentation matters.
Money: $175,000 asking price in Mesa, AZ — exceptional fastback money resting on a single cropped side photo.









