1972 Dodge Charger
$45,000
33 photos of this car.
Price check
Details
| Year | 1972 |
|---|---|
| Model | Charger |
| Series | Charger |
| VIN | WP29M2A142014 |
| Mileage | 30,000 miles |
| Colour (as listed by seller) | Plum Crazy Purple |
| Interior colour | Black |
| Transmission | Manual |
| Seller | Hemmings |
| Listed by | Hemmings |
About this car
1972 Dodge charger listed on Hemmings in the United States. Asking $45,000.
More about this car
I've owned this car since 2014, it's a 1972 Dodge Charger SE that has a 2004 Dodge Viper V10, and a T-56 Transmission. The doors and hood are for a 1972 Ralleye Charger, with the gills on the side and the year correct Power Bulge hood.The wiring/ECU was originally done by Arrow Racing in Auburn Hills Mi.The engine and trans were purchased with less than 500 miles on the two. The rear end is an 8 3/4 Suregrip with a 3.73 rear gear. The suspension is all QA1, including the tubular chrome moly K-member. The brakes are Wilwood 12.9\" 4 Piston solid rotors, with a Hydroboost system. The rack and pinion is a quick ratio Flaming River rack. The rear leaf springs are HEMI 7 leaf on both sides. It's sitting on 17\" American Racing Bandit rims, with a 245/55/R17 Hankook in the front, with Nitto 555R Drag radials in 305/45/R17 in the rear. The interior is mostly a 1972 charger, aside from the ACR five-point harness, and the 2010 Viper racing seats.It has a vintage air system installed with very cold AC and heat.The project took about three years to build, it drives excellent on the street or highway. It handles fantastic for a 50+ year old car due to the upgraded QA1 parts, it still is using the torsion bars and leaf springs.The body was originally stripped to bare steel, and sandblasted. After it was coated in an Epoxy primer to fully seal the metal. The underside is just as nice as the top.This car is originally from Michigan, and was imported to Canada in 2014.
What the pictures show
- Metallic purple paint with a white hood panel and bee emblem, even and glossy in the lot photos.
- Body panels look straight down both sides; chrome and trim are minimal and tidy.
- Five-spoke alloy wheels with low-profile tires fill the arches; stance sits level.
- Black interior with high-back front buckets, a plain black rear bench and woodgrain door inserts showing light wear.
- The engine bay holds a Viper V10 swap — red VIPER valve covers, polished intake piping and a tidy install in a purple-painted bay.
- Underside photos show painted purple floors, dual exhaust, aftermarket suspension links and no visible rot.
- The trunk photo shows the battery relocated there on a black mat.
- No odometer close-up in the set, so the mileage can't be verified from the photos.
Money: at $45,000 this buys a completed Viper-V10 restomod with a documented-looking underside — the money is in the swap and the paint — but budget for sorting any drivability quirks of a custom build, and the true mileage can't be judged from the photos.









































